Building the build Environment -> extracting base tarball [/var/cache/pbuilder/base-frankie-amd64.tgz] -> creating local configuration -> copying local configuration -> mounting /proc filesystem -> mounting /dev/pts filesystem -> Mounting /svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area -> policy-rc.d already exists Obtaining the cached apt archive contents Reading package lists... Building dependency tree... Reading state information... passwd is already the newest version. The following extra packages will be installed: cdebootstrap libdebian-installer-extra4 libdebian-installer4 libssl0.9.8 wget Suggested packages: pbuilder-uml gdebi cowdancer Recommended packages: fakeroot sudo devscripts The following NEW packages will be installed: cdebootstrap libdebian-installer-extra4 libdebian-installer4 libssl0.9.8 pbuilder wget 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/2144kB of archives. After this operation, 6226kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libssl0.9.8 wget libdebian-installer4 libdebian-installer-extra4 cdebootstrap pbuilder debconf: delaying package configuration, since apt-utils is not installed Selecting previously deselected package libssl0.9.8. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10362 files and directories currently installed.) Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8k-5_amd64.deb) ... Selecting previously deselected package wget. Unpacking wget (from .../wget_1.12-1.1_amd64.deb) ... Selecting previously deselected package libdebian-installer4. Unpacking libdebian-installer4 (from .../libdebian-installer4_0.69_amd64.deb) ... Selecting previously deselected package libdebian-installer-extra4. Unpacking libdebian-installer-extra4 (from .../libdebian-installer-extra4_0.69_amd64.deb) ... Selecting previously deselected package cdebootstrap. Unpacking cdebootstrap (from .../cdebootstrap_0.5.5_amd64.deb) ... Selecting previously deselected package pbuilder. Unpacking pbuilder (from .../pbuilder_0.192_all.deb) ... Setting up libssl0.9.8 (0.9.8k-5) ... Setting up wget (1.12-1.1) ... Setting up libdebian-installer4 (0.69) ... Setting up libdebian-installer-extra4 (0.69) ... Setting up cdebootstrap (0.5.5) ... Setting up pbuilder (0.192) ... Setting DEBBUILDOPTS=-j32 -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder and should Depends: debhelper (>= 5), cdbs, gnome-pkg-tools, pkg-config, autotools-dev dpkg-deb: building package `pbuilder-satisfydepends-dummy' in `/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Reading package lists... Building dependency tree... Reading state information... aptitude is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Selecting previously deselected package pbuilder-satisfydepends-dummy. (Reading database ... 10562 files and directories currently installed.) Unpacking pbuilder-satisfydepends-dummy (from .../pbuilder-satisfydepends-dummy.deb) ... dpkg: dependency problems prevent configuration of pbuilder-satisfydepends-dummy: pbuilder-satisfydepends-dummy depends on debhelper (>= 5); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on gnome-pkg-tools; however: Package gnome-pkg-tools is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. dpkg: error processing pbuilder-satisfydepends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: pbuilder-satisfydepends-dummy Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... The following NEW packages will be installed: autotools-dev{a} bsdmainutils{a} cdbs{a} debhelper{a} file{a} gettext{a} gettext-base{a} gnome-pkg-tools{a} groff-base{a} html2text{a} intltool-debian{a} libcroco3{a} libglib2.0-0{a} libmagic1{a} libpcre3{a} libxml2{a} man-db{a} pkg-config{a} po-debconf{a} The following partially installed packages will be configured: pbuilder-satisfydepends-dummy 0 packages upgraded, 19 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/10.1MB of archives. After unpacking 28.2MB will be used. WARNING: untrusted versions of the following packages will be installed! Untrusted packages could compromise your system's security. You should only proceed with the installation if you are certain that this is what you want to do. debhelper pkg-config bsdmainutils po-debconf libpcre3 groff-base gettext-base intltool-debian cdbs libglib2.0-0 gettext gnome-pkg-tools libcroco3 libxml2 file man-db html2text autotools-dev libmagic1 *** WARNING *** Ignoring these trust violations because aptitude::CmdLine::Ignore-Trust-Violations is 'true'! Writing extended state information... debconf: delaying package configuration, since apt-utils is not installed Selecting previously deselected package libmagic1. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10562 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_5.03-3_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_5.03-3_amd64.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-3_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.22.2-parsix1_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-1_amd64.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_amd64.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-8_amd64.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-8_amd64.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-6_amd64.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_8.0.1_amd64.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.6-4_amd64.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.4.3_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../cdbs_0.4.62+nmu1_all.deb) ... Selecting previously deselected package gnome-pkg-tools. Unpacking gnome-pkg-tools (from .../gnome-pkg-tools_0.15.2_all.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.22-1_amd64.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20090611.1_all.deb) ... Setting up libmagic1 (5.03-3) ... Setting up file (5.03-3) ... Setting up html2text (1.3.2a-14) ... Setting up libpcre3 (7.8-3) ... Setting up libglib2.0-0 (2.22.2-parsix1) ... Setting up libxml2 (2.7.6.dfsg-1) ... Setting up libcroco3 (0.6.2-1) ... Setting up gettext-base (0.17-8) ... Setting up gettext (0.17-8) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up groff-base (1.20.1-6) ... Setting up bsdmainutils (8.0.1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up man-db (2.5.6-4) ... Building database of manual pages ... Setting up debhelper (7.4.3) ... Setting up cdbs (0.4.62+nmu1) ... Setting up gnome-pkg-tools (0.15.2) ... Setting up pkg-config (0.22-1) ... Setting up autotools-dev (20090611.1) ... Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: fakeroot 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/99.6kB of archives. After this operation, 385kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! fakeroot debconf: delaying package configuration, since apt-utils is not installed Selecting previously deselected package fakeroot. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11880 files and directories currently installed.) Unpacking fakeroot (from .../fakeroot_1.14.3_amd64.deb) ... Processing triggers for man-db ... Setting up fakeroot (1.14.3) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. dpkg-buildpackage: warning: using a gain-root-command while being root dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package gnome-common dpkg-buildpackage: source version 2.28.0-parsix1 dpkg-buildpackage: source changed by Alan Baghumian dpkg-buildpackage: host architecture amd64 fakeroot debian/rules clean test -x debian/rules dh_testroot /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/02_autogen_required_versions.patch debian/patches/03_bashisms.patch Patch debian/patches/03_bashisms.patch is not applied. Patch debian/patches/02_autogen_required_versions.patch is not applied. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done /usr/bin/make -C . -k distclean make[1]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-build dh_clean rm -f debian/stamp-autotools-files sed "s/@GNOME_TEAM@/Debian GNOME Maintainers , Emilio Pozuelo Monfort , Josselin Mouette , Loic Minier , Sebastian Dröge /" \ debian/control.in > debian/control dpkg-source -b gnome-common-2.28.0 dpkg-source: info: using source format `1.0' dpkg-source: info: building gnome-common using existing gnome-common_2.28.0.orig.tar.gz dpkg-source: info: building gnome-common in gnome-common_2.28.0-parsix1.diff.gz dpkg-source: info: building gnome-common in gnome-common_2.28.0-parsix1.dsc debian/rules build test -x debian/rules mkdir -p "." /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[1]: Nothing to be done for `reverse-config'. make[1]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/02_autogen_required_versions.patch debian/patches/03_bashisms.patch Trying patch debian/patches/02_autogen_required_versions.patch at level 1 ... success. Trying patch debian/patches/03_bashisms.patch at level 1 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[1]: Nothing to be done for `update-config'. make[1]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' touch debian/stamp-autotools-files chmod a+x /svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/./configure cd . && CC="cc" CXX="g++" CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="" /svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/./configure --build=x86_64-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/gnome-common" --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --srcdir=. configure: WARNING: unrecognized options: --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to disable maintainer-specific portions of Makefiles... no configure: creating ./config.status config.status: creating Makefile config.status: creating gnome-common.spec config.status: creating macros2/Makefile config.status: creating doc-build/Makefile config.status: creating doc-build/gnome-doc-common configure: WARNING: unrecognized options: --disable-dependency-tracking /usr/bin/make -C . make[1]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' Making all in macros2 make[2]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/macros2' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/macros2' Making all in doc-build make[2]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/doc-build' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/doc-build' make[2]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[2]: Nothing to be done for `all-am'. make[2]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[1]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks fakeroot debian/rules binary test -x debian/rules dh_testroot dh_clean -k dh_installdirs -A mkdir -p "." DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install DESTDIR=/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common/ make[1]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' Making install in macros2 make[2]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/macros2' make[3]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/macros2' test -z "/usr/bin" || /bin/mkdir -p "/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common//usr/bin" test -z "/usr/share/aclocal" || /bin/mkdir -p "/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common//usr/share/aclocal" /usr/bin/install -c gnome-autogen.sh '/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common//usr/bin' /usr/bin/install -c -m 644 gnome-common.m4 gnome-compiler-flags.m4 '/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common//usr/share/aclocal' make[3]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/macros2' make[2]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/macros2' Making install in doc-build make[2]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/doc-build' make[3]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/doc-build' test -z "/usr/bin" || /bin/mkdir -p "/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common//usr/bin" test -z "/usr/share/gnome-common/data" || /bin/mkdir -p "/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common//usr/share/gnome-common/data" /usr/bin/install -c gnome-doc-common '/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common//usr/bin' /usr/bin/install -c -m 644 omf.make xmldocs.make '/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/debian/gnome-common//usr/share/gnome-common/data' make[3]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/doc-build' make[2]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0/doc-build' make[2]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[3]: Entering directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[2]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' make[1]: Leaving directory `/svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area/gnome-common-2.28.0' dh_installdirs -pgnome-common dh_installdocs -pgnome-common ./README dh_installexamples -pgnome-common dh_installman -pgnome-common dh_installinfo -pgnome-common dh_installmenu -pgnome-common dh_installcron -pgnome-common dh_installinit -pgnome-common dh_installdebconf -pgnome-common dh_installemacsen -pgnome-common dh_installcatalogs -pgnome-common dh_installpam -pgnome-common dh_installlogrotate -pgnome-common dh_installlogcheck -pgnome-common dh_installchangelogs -pgnome-common ./ChangeLog dh_installudev -pgnome-common dh_lintian -pgnome-common dh_install -pgnome-common dh_link -pgnome-common dh_installmime -pgnome-common dh_strip -pgnome-common dh_compress -pgnome-common dh_fixperms -pgnome-common dh_makeshlibs -pgnome-common dh_installdeb -pgnome-common dh_perl -pgnome-common dh_shlibdeps -pgnome-common dh_gencontrol -pgnome-common dh_md5sums -pgnome-common dh_builddeb -pgnome-common dpkg-deb: building package `gnome-common' in `../gnome-common_2.28.0-parsix1_all.deb'. dpkg-genchanges >../gnome-common_2.28.0-parsix1_amd64.changes dpkg-genchanges: not including original source code in upload dpkg-buildpackage: binary and diff upload (original source NOT included) Copying back the cached apt archive contents -> unmounting /svn/pkg-parsix/pkg/frankie/main/gnome-common/build-area filesystem -> unmounting dev/pts filesystem -> unmounting proc filesystem -> cleaning the build env -> removing directory /var/cache/pbuilder/build//28241 and its subdirectories Tagging gnome-common 2.28.0-parsix1 Build OK