Building the build Environment -> extracting base tarball [/var/cache/pbuilder/base-boss-i386.tgz] -> creating local configuration -> copying local configuration -> mounting /proc filesystem -> mounting /dev/pts filesystem -> Mounting /svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area -> policy-rc.d already exists Obtaining the cached apt archive contents Reading package lists... Building dependency tree... Reading state information... passwd is already the newest version. The following extra packages will be installed: cdebootstrap libdebian-installer-extra4 libdebian-installer4 libssl0.9.8 wget Suggested packages: pbuilder-uml Recommended packages: fakeroot sudo devscripts cowdancer The following NEW packages will be installed: cdebootstrap libdebian-installer-extra4 libdebian-installer4 libssl0.9.8 pbuilder wget 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/3877kB of archives. After this operation, 9720kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libssl0.9.8 wget libdebian-installer4 libdebian-installer-extra4 cdebootstrap pbuilder debconf: delaying package configuration, since apt-utils is not installed Selecting previously deselected package libssl0.9.8. (Reading database ... 9670 files and directories currently installed.) Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-14_i386.deb) ... Selecting previously deselected package wget. Unpacking wget (from .../wget_1.11.4-2_i386.deb) ... Selecting previously deselected package libdebian-installer4. Unpacking libdebian-installer4 (from .../libdebian-installer4_0.61_i386.deb) ... Selecting previously deselected package libdebian-installer-extra4. Unpacking libdebian-installer-extra4 (from .../libdebian-installer-extra4_0.61_i386.deb) ... Selecting previously deselected package cdebootstrap. Unpacking cdebootstrap (from .../cdebootstrap_0.5.3_i386.deb) ... Selecting previously deselected package pbuilder. Unpacking pbuilder (from .../pbuilder_0.181_all.deb) ... Setting up libssl0.9.8 (0.9.8g-14) ... Setting up wget (1.11.4-2) ... Setting up libdebian-installer4 (0.61) ... Setting up libdebian-installer-extra4 (0.61) ... Setting up cdebootstrap (0.5.3) ... Setting up pbuilder (0.181) ... Setting DEBBUILDOPTS=-j2 -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder and should Depends: debhelper (>= 5), cdbs, quilt, autotools-dev, libpulse-dev (>= 0.9.8), libgstreamer0.10-dev, libgstreamer-plugins-base0.10-dev, lynx dpkg-deb: building package `pbuilder-satisfydepends-dummy' in `/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Reading package lists... Building dependency tree... Reading state information... aptitude is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Selecting previously deselected package pbuilder-satisfydepends-dummy. (Reading database ... 9871 files and directories currently installed.) Unpacking pbuilder-satisfydepends-dummy (from .../pbuilder-satisfydepends-dummy.deb) ... dpkg: dependency problems prevent configuration of pbuilder-satisfydepends-dummy: pbuilder-satisfydepends-dummy depends on debhelper (>= 5); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on quilt; however: Package quilt is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. pbuilder-satisfydepends-dummy depends on libpulse-dev (>= 0.9.8); however: Package libpulse-dev is not installed. pbuilder-satisfydepends-dummy depends on libgstreamer0.10-dev; however: Package libgstreamer0.10-dev is not installed. pbuilder-satisfydepends-dummy depends on libgstreamer-plugins-base0.10-dev; however: Package libgstreamer-plugins-base0.10-dev is not installed. pbuilder-satisfydepends-dummy depends on lynx; however: Package lynx is not installed. dpkg: error processing pbuilder-satisfydepends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: pbuilder-satisfydepends-dummy Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... The following NEW packages will be installed: autotools-dev{a} bsdmainutils{a} cdbs{a} check{a} debhelper{a} diffstat{a} file{a} gettext{a} gettext-base{a} groff-base{a} html2text{a} intltool-debian{a} libasyncns0{a} libavahi-client-dev{a} libavahi-client3{a} libavahi-common-data{a} libavahi-common-dev{a} libavahi-common3{a} libcap1{a} libdbus-1-3{a} libdbus-1-dev{a} libgcrypt11{a} libglib2.0-0{a} libglib2.0-dev{a} libgnutls26{a} libgpg-error0{a} libgstreamer-plugins-base0.10-0{a} libgstreamer-plugins-base0.10-dev{a} libgstreamer0.10-0{a} libgstreamer0.10-dev{a} libice-dev{a} libice6{a} libmagic1{a} libpcre3{a} libpopt-dev{a} libpopt0{a} libpthread-stubs0{a} libpthread-stubs0-dev{a} libpulse-browse0{a} libpulse-dev{a} libpulse-mainloop-glib0{a} libpulse0{a} libsm-dev{a} libsm6{a} libtasn1-3{a} libx11-6{a} libx11-data{a} libx11-dev{a} libxau-dev{a} libxau6{a} libxcb-xlib0{a} libxcb-xlib0-dev{a} libxcb1{a} libxcb1-dev{a} libxdmcp-dev{a} libxdmcp6{a} libxml2{a} libxml2-dev{a} libxt-dev{a} libxt6{a} lynx{a} lynx-cur{a} man-db{a} pkg-config{a} po-debconf{a} quilt{a} x11-common{a} x11proto-core-dev{a} x11proto-input-dev{a} x11proto-kb-dev{a} xtrans-dev{a} The following partially installed packages will be configured: pbuilder-satisfydepends-dummy 0 packages upgraded, 71 newly installed, 0 to remove and 0 not upgraded. Need to get 423kB/22.0MB of archives. After unpacking 62.0MB will be used. WARNING: untrusted versions of the following packages will be installed! Untrusted packages could compromise your system's security. You should only proceed with the installation if you are certain that this is what you want to do. libpopt-dev libsm-dev libpopt0 libice-dev diffstat libgstreamer0.10-0 debhelper pkg-config intltool-debian x11proto-kb-dev libglib2.0-dev libx11-data libpulse-dev libavahi-common-data libdbus-1-3 lynx check libcap1 quilt po-debconf libgstreamer-plugins-base0.10-dev libpcre3 groff-base libgnutls26 libpulse-mainloop-glib0 libxdmcp-dev libavahi-client-dev libtasn1-3 cdbs xtrans-dev x11proto-core-dev gettext libxcb1 libxau6 lynx-cur libdbus-1-dev autotools-dev libxt-dev libice6 libxdmcp6 libgcrypt11 libxml2 file libxml2-dev x11proto-input-dev bsdmainutils libgpg-error0 libpthread-stubs0-dev libxau-dev libpthread-stubs0 gettext-base libasyncns0 libxcb-xlib0 libavahi-client3 libglib2.0-0 x11-common libx11-6 man-db html2text libsm6 libpulse0 libx11-dev libxcb-xlib0-dev libgstreamer0.10-dev libpulse-browse0 libxcb1-dev libavahi-common-dev libavahi-common3 libxt6 libgstreamer-plugins-base0.10-0 libmagic1 *** WARNING *** Ignoring these trust violations because aptitude::CmdLine::Ignore-Trust-Violations is 'true'! Writing extended state information... Get:1 http://192.168.1.65 boss/main libgstreamer-plugins-base0.10-0 0.10.20-1 [324kB] Get:2 http://192.168.1.65 boss/main libgstreamer-plugins-base0.10-dev 0.10.20-1 [98.6kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 423kB in 0s (29.8MB/s) Selecting previously deselected package libmagic1. (Reading database ... 9871 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_4.26-1_i386.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.26-1_i386.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-5_i386.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-4_i386.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-4_i386.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.15_all.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1.1-21_i386.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.1.10_i386.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.2-3_i386.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.0.15_all.deb) ... Selecting previously deselected package cdbs. Unpacking cdbs (from .../archives/cdbs_0.4.52_all.deb) ... Selecting previously deselected package diffstat. Unpacking diffstat (from .../diffstat_1.45-2_i386.deb) ... Selecting previously deselected package quilt. Unpacking quilt (from .../archives/quilt_0.46-6_all.deb) ... Selecting previously deselected package autotools-dev. Unpacking autotools-dev (from .../autotools-dev_20080123.1_all.deb) ... Selecting previously deselected package libasyncns0. Unpacking libasyncns0 (from .../libasyncns0_0.3-1_i386.deb) ... Selecting previously deselected package libcap1. Unpacking libcap1 (from .../libcap1_1%3a1.10-14_i386.deb) ... Selecting previously deselected package x11-common. Unpacking x11-common (from .../x11-common_1%3a7.3+18_all.deb) ... Selecting previously deselected package libice6. Unpacking libice6 (from .../libice6_2%3a1.0.4-1_i386.deb) ... Selecting previously deselected package libsm6. Unpacking libsm6 (from .../libsm6_2%3a1.0.3-2_i386.deb) ... Setting up x11-common (1:7.3+18) ... Selecting previously deselected package libx11-data. (Reading database ... 11189 files and directories currently installed.) Unpacking libx11-data (from .../libx11-data_2%3a1.1.4-1_all.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.3-3_i386.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.0.2-3_i386.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.1-1.1_i386.deb) ... Selecting previously deselected package libxcb-xlib0. Unpacking libxcb-xlib0 (from .../libxcb-xlib0_1.1-1.1_i386.deb) ... Selecting previously deselected package libx11-6. Unpacking libx11-6 (from .../libx11-6_2%3a1.1.4-1_i386.deb) ... Selecting previously deselected package libpulse0. Unpacking libpulse0 (from .../libpulse0_0.9.10-3_i386.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.6-2.1_i386.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.18.3-parsix1_i386.deb) ... Selecting previously deselected package libpulse-mainloop-glib0. Unpacking libpulse-mainloop-glib0 (from .../libpulse-mainloop-glib0_0.9.10-3_i386.deb) ... Selecting previously deselected package libavahi-common-data. Unpacking libavahi-common-data (from .../libavahi-common-data_0.6.22-3_i386.deb) ... Selecting previously deselected package libavahi-common3. Unpacking libavahi-common3 (from .../libavahi-common3_0.6.22-3_i386.deb) ... Selecting previously deselected package libdbus-1-3. Unpacking libdbus-1-3 (from .../libdbus-1-3_1.2.4-1_i386.deb) ... Selecting previously deselected package libavahi-client3. Unpacking libavahi-client3 (from .../libavahi-client3_0.6.22-3_i386.deb) ... Selecting previously deselected package libpulse-browse0. Unpacking libpulse-browse0 (from .../libpulse-browse0_0.9.10-3_i386.deb) ... Selecting previously deselected package x11proto-core-dev. Unpacking x11proto-core-dev (from .../x11proto-core-dev_7.0.12-1_all.deb) ... Selecting previously deselected package libxau-dev. Unpacking libxau-dev (from .../libxau-dev_1%3a1.0.3-3_i386.deb) ... Selecting previously deselected package libpthread-stubs0. Unpacking libpthread-stubs0 (from .../libpthread-stubs0_0.1-2_i386.deb) ... Selecting previously deselected package libpthread-stubs0-dev. Unpacking libpthread-stubs0-dev (from .../libpthread-stubs0-dev_0.1-2_i386.deb) ... Selecting previously deselected package libxdmcp-dev. Unpacking libxdmcp-dev (from .../libxdmcp-dev_1%3a1.0.2-3_i386.deb) ... Selecting previously deselected package libxcb1-dev. Unpacking libxcb1-dev (from .../libxcb1-dev_1.1-1.1_i386.deb) ... Selecting previously deselected package libxcb-xlib0-dev. Unpacking libxcb-xlib0-dev (from .../libxcb-xlib0-dev_1.1-1.1_i386.deb) ... Selecting previously deselected package x11proto-input-dev. Unpacking x11proto-input-dev (from .../x11proto-input-dev_1.4.3-2_all.deb) ... Selecting previously deselected package x11proto-kb-dev. Unpacking x11proto-kb-dev (from .../x11proto-kb-dev_1.0.3-3_all.deb) ... Selecting previously deselected package xtrans-dev. Unpacking xtrans-dev (from .../xtrans-dev_1.2-2_all.deb) ... Selecting previously deselected package libx11-dev. Unpacking libx11-dev (from .../libx11-dev_2%3a1.1.4-1_i386.deb) ... Selecting previously deselected package libxt6. Unpacking libxt6 (from .../libxt6_1%3a1.0.5-3_i386.deb) ... Selecting previously deselected package libice-dev. Unpacking libice-dev (from .../libice-dev_2%3a1.0.4-1_i386.deb) ... Selecting previously deselected package libsm-dev. Unpacking libsm-dev (from .../libsm-dev_2%3a1.0.3-2_i386.deb) ... Selecting previously deselected package libxt-dev. Unpacking libxt-dev (from .../libxt-dev_1%3a1.0.5-3_i386.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.22-1_i386.deb) ... Selecting previously deselected package libglib2.0-dev. Unpacking libglib2.0-dev (from .../libglib2.0-dev_2.18.3-parsix1_i386.deb) ... Selecting previously deselected package libavahi-common-dev. Unpacking libavahi-common-dev (from .../libavahi-common-dev_0.6.22-3_i386.deb) ... Selecting previously deselected package libdbus-1-dev. Unpacking libdbus-1-dev (from .../libdbus-1-dev_1.2.4-1_i386.deb) ... Selecting previously deselected package libavahi-client-dev. Unpacking libavahi-client-dev (from .../libavahi-client-dev_0.6.22-3_i386.deb) ... Selecting previously deselected package libpulse-dev. Unpacking libpulse-dev (from .../libpulse-dev_0.9.10-3_i386.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.6.32.dfsg-5_i386.deb) ... Selecting previously deselected package libgstreamer0.10-0. Unpacking libgstreamer0.10-0 (from .../libgstreamer0.10-0_0.10.20-1_i386.deb) ... Selecting previously deselected package libpopt0. Unpacking libpopt0 (from .../libpopt0_1.14-4_i386.deb) ... Selecting previously deselected package libpopt-dev. Unpacking libpopt-dev (from .../libpopt-dev_1.14-4_i386.deb) ... Selecting previously deselected package libxml2-dev. Unpacking libxml2-dev (from .../libxml2-dev_2.6.32.dfsg-5_i386.deb) ... Selecting previously deselected package check. Unpacking check (from .../check_0.9.5-4_i386.deb) ... Selecting previously deselected package libgstreamer0.10-dev. Unpacking libgstreamer0.10-dev (from .../libgstreamer0.10-dev_0.10.20-1_i386.deb) ... Selecting previously deselected package libgstreamer-plugins-base0.10-0. Unpacking libgstreamer-plugins-base0.10-0 (from .../libgstreamer-plugins-base0.10-0_0.10.20-1_i386.deb) ... Selecting previously deselected package libgstreamer-plugins-base0.10-dev. Unpacking libgstreamer-plugins-base0.10-dev (from .../libgstreamer-plugins-base0.10-dev_0.10.20-1_i386.deb) ... Selecting previously deselected package libgpg-error0. Unpacking libgpg-error0 (from .../libgpg-error0_1.4-2_i386.deb) ... Selecting previously deselected package libgcrypt11. Unpacking libgcrypt11 (from .../libgcrypt11_1.4.1-1_i386.deb) ... Selecting previously deselected package libtasn1-3. Unpacking libtasn1-3 (from .../libtasn1-3_1.4-1_i386.deb) ... Selecting previously deselected package libgnutls26. Unpacking libgnutls26 (from .../libgnutls26_2.4.2-4_i386.deb) ... Selecting previously deselected package lynx-cur. Unpacking lynx-cur (from .../lynx-cur_2.8.7dev9-2.1_i386.deb) ... Selecting previously deselected package lynx. Unpacking lynx (from .../lynx_2.8.7dev9-2.1_all.deb) ... Setting up libmagic1 (4.26-1) ... Setting up file (4.26-1) ... Setting up html2text (1.3.2a-5) ... Setting up gettext-base (0.17-4) ... Setting up gettext (0.17-4) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.15) ... Setting up groff-base (1.18.1.1-21) ... Setting up bsdmainutils (6.1.10) ... Setting up man-db (2.5.2-3) ... Building database of manual pages ... Setting up debhelper (7.0.15) ... Setting up cdbs (0.4.52) ... Setting up diffstat (1.45-2) ... Setting up quilt (0.46-6) ... Setting up autotools-dev (20080123.1) ... Setting up libasyncns0 (0.3-1) ... Setting up libcap1 (1:1.10-14) ... Setting up libice6 (2:1.0.4-1) ... Setting up libsm6 (2:1.0.3-2) ... Setting up libx11-data (2:1.1.4-1) ... Setting up libxau6 (1:1.0.3-3) ... Setting up libxdmcp6 (1:1.0.2-3) ... Setting up libxcb1 (1.1-1.1) ... Setting up libxcb-xlib0 (1.1-1.1) ... Setting up libx11-6 (2:1.1.4-1) ... Setting up libpulse0 (0.9.10-3) ... Setting up libpcre3 (7.6-2.1) ... Setting up libglib2.0-0 (2.18.3-parsix1) ... Setting up libpulse-mainloop-glib0 (0.9.10-3) ... Setting up libavahi-common-data (0.6.22-3) ... Setting up libavahi-common3 (0.6.22-3) ... Setting up libdbus-1-3 (1.2.4-1) ... Setting up libavahi-client3 (0.6.22-3) ... Setting up libpulse-browse0 (0.9.10-3) ... Setting up x11proto-core-dev (7.0.12-1) ... Setting up libxau-dev (1:1.0.3-3) ... Setting up libpthread-stubs0 (0.1-2) ... Setting up libpthread-stubs0-dev (0.1-2) ... Setting up libxdmcp-dev (1:1.0.2-3) ... Setting up libxcb1-dev (1.1-1.1) ... Setting up libxcb-xlib0-dev (1.1-1.1) ... Setting up x11proto-input-dev (1.4.3-2) ... Setting up x11proto-kb-dev (1.0.3-3) ... Setting up xtrans-dev (1.2-2) ... Setting up libx11-dev (2:1.1.4-1) ... Setting up libxt6 (1:1.0.5-3) ... Setting up libice-dev (2:1.0.4-1) ... Setting up libsm-dev (2:1.0.3-2) ... Setting up libxt-dev (1:1.0.5-3) ... Setting up pkg-config (0.22-1) ... Setting up libglib2.0-dev (2.18.3-parsix1) ... Setting up libavahi-common-dev (0.6.22-3) ... Setting up libdbus-1-dev (1.2.4-1) ... Setting up libavahi-client-dev (0.6.22-3) ... Setting up libpulse-dev (0.9.10-3) ... Setting up libxml2 (2.6.32.dfsg-5) ... Setting up libgstreamer0.10-0 (0.10.20-1) ... Setting up libpopt0 (1.14-4) ... Setting up libpopt-dev (1.14-4) ... Setting up libxml2-dev (2.6.32.dfsg-5) ... Setting up check (0.9.5-4) ... Setting up libgstreamer0.10-dev (0.10.20-1) ... Setting up libgstreamer-plugins-base0.10-0 (0.10.20-1) ... Setting up libgstreamer-plugins-base0.10-dev (0.10.20-1) ... Setting up libgpg-error0 (1.4-2) ... Setting up libgcrypt11 (1.4.1-1) ... Setting up libtasn1-3 (1.4-1) ... Setting up libgnutls26 (2.4.2-4) ... Setting up lynx-cur (2.8.7dev9-2.1) ... Setting up lynx (2.8.7dev9-2.1) ... Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: fakeroot 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/114kB of archives. After this operation, 451kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! fakeroot debconf: delaying package configuration, since apt-utils is not installed Selecting previously deselected package fakeroot. (Reading database ... 13799 files and directories currently installed.) Unpacking fakeroot (from .../fakeroot_1.11_i386.deb) ... Processing triggers for man-db ... Setting up fakeroot (1.11) ... dpkg-buildpackage: warning: using a gain-root-command while being root dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package gst-pulse dpkg-buildpackage: source version 0.9.7-2 dpkg-buildpackage: source changed by Alan Baghumian dpkg-buildpackage: host architecture i386 fakeroot debian/rules clean test -x debian/rules dh_testroot /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done make[1]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/GST_S32_BE_equals_PA_SAMPLE_S32BE.patch Patch debian/patches/GST_S32_BE_equals_PA_SAMPLE_S32BE.patch is not applied. if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "reverse-patches" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi for dir in debian/patches ; do \ rm -f $dir/*.log ; \ done for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done dh_clean /usr/bin/make -C . -k distclean make[1]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make[1]: *** No rule to make target `distclean'. make[1]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-build rm -f debian/stamp-autotools-files dpkg-source -b gst-pulse-0.9.7 dpkg-source: info: using source format `1.0' dpkg-source: info: building gst-pulse using existing gst-pulse_0.9.7.orig.tar.gz dpkg-source: info: building gst-pulse in gst-pulse_0.9.7-2.diff.gz dpkg-source: info: building gst-pulse in gst-pulse_0.9.7-2.dsc debian/rules build test -x debian/rules mkdir -p "." /usr/bin/make -f debian/rules reverse-config make[1]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' for i in ./config.guess ./config.sub ; do \ if test -e $i.cdbs-orig ; then \ mv $i.cdbs-orig $i ; \ fi ; \ done make[1]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f debian/stamp-patched; fi patches: debian/patches/GST_S32_BE_equals_PA_SAMPLE_S32BE.patch Trying patch debian/patches/GST_S32_BE_equals_PA_SAMPLE_S32BE.patch at level 1 ... 0 ... success. if [ "debian/stamp-patched" != "reverse-patches" ]; then touch debian/stamp-patched; fi if [ "debian/stamp-patched" != "reverse-patches" ] ; then \ /usr/bin/make -f debian/rules update-config ; \ fi make[1]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi make[1]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi touch debian/stamp-autotools-files chmod a+x /svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/./configure cd . && CC="cc" CXX="g++" CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="" /svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/./configure --build=i486-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/gst-pulse" --disable-maintainer-mode --disable-dependency-tracking --srcdir=. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of cc... none checking whether ln -s works... yes checking build system type... i486-pc-linux-gnu checking host system type... i486-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for gethostname... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for an ANSI C-conforming const... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for size_t... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for PULSE... yes checking for GST... yes checking for lynx... yes configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating doc/Makefile config.status: creating doc/README.html config.status: creating config.h config.status: executing depfiles commands /usr/bin/make -C . make[1]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' /usr/bin/make all-recursive make[2]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' Making all in src make[3]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/src' /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c -o libgstpulse_la-plugin.lo `test -f 'plugin.c' || echo './'`plugin.c /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c -o libgstpulse_la-pulsesink.lo `test -f 'pulsesink.c' || echo './'`pulsesink.c mkdir .libs cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c plugin.c -fPIC -DPIC -o .libs/libgstpulse_la-plugin.o cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c pulsesink.c -fPIC -DPIC -o .libs/libgstpulse_la-pulsesink.o pulsesink.c: In function 'gst_pulsesink_get_type': pulsesink.c:649: warning: missing initializer pulsesink.c:649: warning: (near initialization for 'pulsesink_info.value_table') /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c -o libgstpulse_la-pulsesrc.lo `test -f 'pulsesrc.c' || echo './'`pulsesrc.c cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c pulsesrc.c -fPIC -DPIC -o .libs/libgstpulse_la-pulsesrc.o /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c -o libgstpulse_la-pulseutil.lo `test -f 'pulseutil.c' || echo './'`pulseutil.c pulsesrc.c: In function 'gst_pulsesrc_get_type': pulsesrc.c:617: warning: missing initializer pulsesrc.c:617: warning: (near initialization for 'pulsesrc_info.value_table') cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c pulseutil.c -fPIC -DPIC -o .libs/libgstpulse_la-pulseutil.o /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c -o libgstpulse_la-pulsemixer.lo `test -f 'pulsemixer.c' || echo './'`pulsemixer.c /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c -o libgstpulse_la-pulsemixerctrl.lo `test -f 'pulsemixerctrl.c' || echo './'`pulsemixerctrl.c cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c pulsemixer.c -fPIC -DPIC -o .libs/libgstpulse_la-pulsemixer.o cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c pulsemixerctrl.c -fPIC -DPIC -o .libs/libgstpulse_la-pulsemixerctrl.o /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c -o libgstpulse_la-pulsemixertrack.lo `test -f 'pulsemixertrack.c' || echo './'`pulsemixertrack.c /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c -o libgstpulse_la-pulseprobe.lo `test -f 'pulseprobe.c' || echo './'`pulseprobe.c cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c pulsemixertrack.c -fPIC -DPIC -o .libs/libgstpulse_la-pulsemixertrack.o cc -DHAVE_CONFIG_H -I. -I. -I.. -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -D_REENTRANT -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -c pulseprobe.c -fPIC -DPIC -o .libs/libgstpulse_la-pulseprobe.o pulseprobe.c: In function 'gst_pulseprobe_get_values': pulseprobe.c:292: warning: missing initializer pulseprobe.c:292: warning: (near initialization for 'value.data') /bin/sh ../libtool --tag=CC --mode=link cc -g -O2 -g -Wall -O2 -pipe -Wall -W -Wno-unused-parameter -o libgstpulse.la -rpath /usr/lib/gstreamer-0.10 -avoid-version -module -export-dynamic libgstpulse_la-plugin.lo libgstpulse_la-pulsesink.lo libgstpulse_la-pulsesrc.lo libgstpulse_la-pulseutil.lo libgstpulse_la-pulsemixer.lo libgstpulse_la-pulsemixerctrl.lo libgstpulse_la-pulsemixertrack.lo libgstpulse_la-pulseprobe.lo -lpulse -pthread -lgstreamer-0.10 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lxml2 -lglib-2.0 -lgstaudio-0.10 cc -shared .libs/libgstpulse_la-plugin.o .libs/libgstpulse_la-pulsesink.o .libs/libgstpulse_la-pulsesrc.o .libs/libgstpulse_la-pulseutil.o .libs/libgstpulse_la-pulsemixer.o .libs/libgstpulse_la-pulsemixerctrl.o .libs/libgstpulse_la-pulsemixertrack.o .libs/libgstpulse_la-pulseprobe.o -lpulse /usr/lib/libgstreamer-0.10.so /usr/lib/libgobject-2.0.so /usr/lib/libgmodule-2.0.so /usr/lib/libgthread-2.0.so -lrt /usr/lib/libxml2.so /usr/lib/libglib-2.0.so -lgstaudio-0.10 -pthread -Wl,-soname -Wl,libgstpulse.so -o .libs/libgstpulse.so creating libgstpulse.la (cd .libs && rm -f libgstpulse.la && ln -s ../libgstpulse.la libgstpulse.la) make[3]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/src' Making all in doc make[3]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/doc' lynx --dump README.html | sed 's,file://localhost/.*/doc/README.html,README,' > README make[3]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/doc' make[3]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make[2]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make[1]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' touch debian/stamp-makefile-build DEB_MAKE_CHECK_TARGET unset, not running checks fakeroot debian/rules binary test -x debian/rules dh_testroot dh_clean -k dh_installdirs -A mkdir -p "." if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install DESTDIR=/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/debian/tmp/ make[1]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' Making install in src make[2]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/src' make[3]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/src' test -z "/usr/lib/gstreamer-0.10" || mkdir -p -- "/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/debian/tmp//usr/lib/gstreamer-0.10" make[3]: Nothing to be done for `install-data-am'. /bin/sh ../libtool --mode=install /usr/bin/install -c 'libgstpulse.la' '/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/debian/tmp//usr/lib/gstreamer-0.10/libgstpulse.la' /usr/bin/install -c .libs/libgstpulse.so /svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/debian/tmp//usr/lib/gstreamer-0.10/libgstpulse.so /usr/bin/install -c .libs/libgstpulse.lai /svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/debian/tmp//usr/lib/gstreamer-0.10/libgstpulse.la libtool: install: warning: remember to run `libtool --finish /usr/lib/gstreamer-0.10' make[3]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/src' make[2]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/src' Making install in doc make[2]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/doc' make[3]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/doc' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/doc' make[2]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/doc' make[2]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make[3]: Entering directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make[2]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' make[1]: Leaving directory `/svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7' rm /svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area/gst-pulse-0.9.7/debian/tmp//usr/lib/gstreamer-0.10/libgstpulse.la dh_installdirs -pgstreamer0.10-pulseaudio dh_installdirs -plibgstreamer-plugins-pulse0.10-0 dh_installdocs -pgstreamer0.10-pulseaudio ./README dh_installexamples -pgstreamer0.10-pulseaudio dh_installman -pgstreamer0.10-pulseaudio dh_installinfo -pgstreamer0.10-pulseaudio dh_installmenu -pgstreamer0.10-pulseaudio dh_installcron -pgstreamer0.10-pulseaudio dh_installinit -pgstreamer0.10-pulseaudio dh_installdebconf -pgstreamer0.10-pulseaudio dh_installemacsen -pgstreamer0.10-pulseaudio dh_installcatalogs -pgstreamer0.10-pulseaudio dh_installpam -pgstreamer0.10-pulseaudio dh_installlogrotate -pgstreamer0.10-pulseaudio dh_installlogcheck -pgstreamer0.10-pulseaudio dh_installchangelogs -pgstreamer0.10-pulseaudio ./ChangeLog dh_installudev -pgstreamer0.10-pulseaudio dh_lintian -pgstreamer0.10-pulseaudio dh_install -pgstreamer0.10-pulseaudio dh_link -pgstreamer0.10-pulseaudio dh_installmime -pgstreamer0.10-pulseaudio dh_installdocs -plibgstreamer-plugins-pulse0.10-0 ./README dh_installexamples -plibgstreamer-plugins-pulse0.10-0 dh_installman -plibgstreamer-plugins-pulse0.10-0 dh_installinfo -plibgstreamer-plugins-pulse0.10-0 dh_installmenu -plibgstreamer-plugins-pulse0.10-0 dh_installcron -plibgstreamer-plugins-pulse0.10-0 dh_installinit -plibgstreamer-plugins-pulse0.10-0 dh_installdebconf -plibgstreamer-plugins-pulse0.10-0 dh_installemacsen -plibgstreamer-plugins-pulse0.10-0 dh_installcatalogs -plibgstreamer-plugins-pulse0.10-0 dh_installpam -plibgstreamer-plugins-pulse0.10-0 dh_installlogrotate -plibgstreamer-plugins-pulse0.10-0 dh_installlogcheck -plibgstreamer-plugins-pulse0.10-0 dh_installchangelogs -plibgstreamer-plugins-pulse0.10-0 ./ChangeLog dh_installudev -plibgstreamer-plugins-pulse0.10-0 dh_lintian -plibgstreamer-plugins-pulse0.10-0 dh_install -plibgstreamer-plugins-pulse0.10-0 dh_link -plibgstreamer-plugins-pulse0.10-0 dh_installmime -plibgstreamer-plugins-pulse0.10-0 dh_strip -pgstreamer0.10-pulseaudio dh_compress -pgstreamer0.10-pulseaudio dh_fixperms -pgstreamer0.10-pulseaudio dh_makeshlibs -pgstreamer0.10-pulseaudio --noscripts dh_strip -plibgstreamer-plugins-pulse0.10-0 dh_compress -plibgstreamer-plugins-pulse0.10-0 dh_fixperms -plibgstreamer-plugins-pulse0.10-0 dh_makeshlibs -plibgstreamer-plugins-pulse0.10-0 --noscripts dh_installdeb -pgstreamer0.10-pulseaudio dh_perl -pgstreamer0.10-pulseaudio dh_shlibdeps -pgstreamer0.10-pulseaudio dpkg-shlibdeps: warning: symbol gst_property_probe_get_type used by debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so found in none of the libraries. dpkg-shlibdeps: warning: symbol gst_mixer_get_type used by debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so found in none of the libraries. dpkg-shlibdeps: warning: symbol gst_base_sink_get_type used by debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so found in none of the libraries. dpkg-shlibdeps: warning: symbol gst_mixer_track_get_type used by debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so found in none of the libraries. dpkg-shlibdeps: warning: dependency on libgmodule-2.0.so.0 could be avoided if "debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so" were not uselessly linked against it (they use none of its symbols). dpkg-shlibdeps: warning: dependency on libgthread-2.0.so.0 could be avoided if "debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so" were not uselessly linked against it (they use none of its symbols). dpkg-shlibdeps: warning: dependency on librt.so.1 could be avoided if "debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so" were not uselessly linked against it (they use none of its symbols). dpkg-shlibdeps: warning: dependency on libxml2.so.2 could be avoided if "debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so" were not uselessly linked against it (they use none of its symbols). dpkg-shlibdeps: warning: dependency on libpthread.so.0 could be avoided if "debian/gstreamer0.10-pulseaudio/usr/lib/gstreamer-0.10/libgstpulse.so" were not uselessly linked against it (they use none of its symbols). dh_installdeb -plibgstreamer-plugins-pulse0.10-0 dh_perl -plibgstreamer-plugins-pulse0.10-0 dh_shlibdeps -plibgstreamer-plugins-pulse0.10-0 dh_gencontrol -pgstreamer0.10-pulseaudio dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends} dh_md5sums -pgstreamer0.10-pulseaudio dh_builddeb -pgstreamer0.10-pulseaudio dpkg-deb: building package `gstreamer0.10-pulseaudio' in `../gstreamer0.10-pulseaudio_0.9.7-2_i386.deb'. dh_gencontrol -plibgstreamer-plugins-pulse0.10-0 dh_md5sums -plibgstreamer-plugins-pulse0.10-0 dh_builddeb -plibgstreamer-plugins-pulse0.10-0 dpkg-deb: building package `libgstreamer-plugins-pulse0.10-0' in `../libgstreamer-plugins-pulse0.10-0_0.9.7-2_i386.deb'. dpkg-genchanges >../gst-pulse_0.9.7-2_i386.changes dpkg-genchanges: not including original source code in upload dpkg-buildpackage: binary and diff upload (original source NOT included) Copying back the cached apt archive contents -> new cache content libgstreamer-plugins-base0.10-0_0.10.20-1_i386.deb added -> new cache content libgstreamer-plugins-base0.10-dev_0.10.20-1_i386.deb added -> unmounting /svn/pkg-parsix/pkg/boss/main/gst-pulse/build-area filesystem -> unmounting dev/pts filesystem -> unmounting proc filesystem -> cleaning the build env -> removing directory /var/cache/pbuilder/build//5075 and its subdirectories Build OK